Menu Close

TDS 50 Electric Fan Heater

The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continuously adjusting the desired temperature.

In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series don’t consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors.

Enquire Now

Out of stock

Free standard delivery over £200

The possibility for wall mounting or installation under the ceiling opens a wide range of application possibilities, e.g. for the heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boat houses or at installation applications.

Thanks to the integrated thermostat control, the produced warm air flow can be adjusted continuously to the desired temperature at all TDS models.

The TDS electric heaters (excepting TDS 10) can be used in the fan mode without the heating function and they have an ideal temperature control via multistage performance control for demand-based dosing of heating power.

Due to the trapezoidal installed handbarrow, the TDS 50 can be stack up without any problems and stable.

Please note that this heater operates with a 5-pole plug.

Benefits in pratice:

  • 100% TROTEC – development, design, production
  • Multistage temperature control
  • Integrated room thermostat for constant, cosy warmth
  • Overheat protection
  • Fan motor with thermal protection
  • Condensation-free heating – no oxygen consumption – because of that the TDS 50 is suitable for uses in enclosed rooms
  • Wall and ceiling bracket available – mounting is available as an accessory
  • Standard built-in air baffle for optimization of heat dissipation (guarantees maximum efficiency)
  • Fan function
  • Place-saving stackable

Fields of application:

  • Building container
  • Garages
  • Gastronomy
  • Greenhouses
  • Marketplaces
  • Storerooms and workshops
  • Boathouses
  • Workshops
  • Shipbuilding
  • and counting…
Weight9.5 kg
Dimensions28.3 × 35.5 × 51.5 cm

Technical

Technical data:

  • Heating performance stage 1: only fan
  • Heating performance stage 2: 4.5 kW
  • Heating performance stage 3: 9 kW (max. 7,740 kcal)
  • Air flow rate: 708 m³/h
  • Fan stages: 1
  • Power: 13 A
  • Mains voltage: 400 V / 50 Hz
  • Power connector: CEE 16 A, 5-pin
  • Connection cable: accessories
  • Thermostat: integrated
  • Mobility: portable
  • Noise level: 52 dB (A)
  • Overheat protect: existing
  • Protection type: IPX4
  • Length: 283 mm
  • Width: 355 mm
  • Height: 515 mm
  • Weight: 9.5 kg

Downloads

Download Links/info to go Here…