Menu Close

TDS 120 Electric Fan Heater

The TDS 120 Electric Heater provides a heating performance between 15 kW and 30 kW in 3 stages (stage 1 only fan). Furthermore the TDS 120 has an integrated thermostat for continuously adjusting of the desired temperature.

In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series don’t consume oxygen and produce combustion gases. Because of that this devices can be used everywhere, especially for temperature controls unheated interiors.

Enquire Now

Out of stock

Free standard delivery over £200

The possibility for wall mounting or installation under the ceiling open wide range of application possibilities, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications.

Thanks to the integrated thermostat control, the produced warm air flow can be adjusted continuously to the desired temperature at all TDS models.

The TDS electric heaters (excepting TDS 10) can be used in the fan mode without the heating function and they have an ideal temperature control via multistage performance control for demand-based dosing of heating power.

Please note that this heater operates with a 5-pole plug.

Benefits in pratice:

  • 100% TROTEC – development, design, production
  • Multistage temperature control
  • Integrated room thermostat for constant, cosy warmth
  • Overheat protection
  • Fan motor with thermal protection
  • Condensation-free heating – no oxygen consumption – because of that the TDS 120 is suitable for uses in enclosed rooms
  • Wall and ceiling bracket available – mounting is available as an accessory
  • Fan function

Fields of application:

  • Building container
  • Garages
  • Gastronomy
  • Greenhouses
  • Marketplaces
  • Storerooms and workshops
  • Boathouses
  • Workshops
  • Shipbuilding
  • and counting…
Weight25 kg
Dimensions48.5 × 53 × 78.5 cm

Technical

Technical data:

  • Heating performance stage 1: fan only
  • Heating performance stage 2: 15 kW
  • Heating performance stage 3: 30 kW (25,795 kcal)
  • Air flow rate: 1,980 m³/h
  • Nominal current: 44 A
  • Recommended protection: 50 A
  • Mains voltage: 400 V / 50 Hz
  • Power connector: CEE 63 A, 5-pin
  • Connection cable: accessories
  • Thermostat: integrated
  • Mobility: portable
  • Noise level: 73 dB (A)
  • Overheat protect: existing
  • Protection type: IPX4
  • Length: 485 mm
  • Width: 450 mm
  • Height: 665 mm
  • Weight: 25kg

Downloads

Download Links/info to go Here…