Menu Close

TDS 20 Electric Fan Heater

The TDS 20 electric heater provides a heating performance between 1.65 kW and 3.3 kW in 3 stages. Furthermore the TDS 20 has an integrated thermostat and an integrated connection cable (length 1.5 m).

In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series don’t consume oxygen and produce combustion gases. Because of that this devices can be used everywhere, especially for temperature controls unheated interiors.


SKU: 1410000015 Categories: , Tags: , ,

Free standard delivery over £200

The possibility for wall mounting or installation under the ceiling open wide range of application possibilities, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications.

Thanks to the integrated thermostat control, the produced warm air flow can be adjusted continuously to the desired temperature at all TDS models.

The TDS electric heaters (excepting TDS 10) can be used in the fan mode without the heating function and they have an ideal temperature control via multistage performance control for demand-based dosing of heating power.

Benefits in pratice:

  • 100% TROTEC – development, design, production
  • Multistage temperature control with up to 3 heating stages
  • Integrated room thermostat for constant, cosy warmth
  • Overheat protection
  • 10% more power than competitive models
  • Fan motor with thermal protection
  • Condensation-free heating – no oxygen consumption – because of that the TDS 20 is suitable for uses in enclosed rooms
  • Wall and ceiling bracket available – mounting is available as an accessory
  • Standard built-in air baffle for optimization of heat dissipation (guarantees maximum efficiency)
  • Fan function

Fields of application:

  • Building container
  • Garages
  • Gastronomy
  • Greenhouses
  • Marketplaces
  • Storerooms and workshops
  • Boathouses
  • Workshops
  • Shipbuilding
  • and counting…
Weight5 kg
Dimensions26.5 × 25.5 × 39.5 cm


Technical data:

  • Heating performance stage 1: only fan
  • Heating performance stage 2: 1.65 kW
  • Heating performance stage 3: 3.3 kW (max. 2,840 kcal)
  • Air flow rate: 335 m³/h
  • Blower stages: 1
  • Power: 14.3 A
  • Mains voltage: 230 V / 50 Hz
  • Power connector: Schuko-plug / CEE 7/7
  • Connection cable: integrated (length 1.5m)
  • Thermostat: integrated
  • Mobility: portable
  • Noise level: 46 dB (A)
  • Overheat protect: existing
  • Protection type: IPX4
  • Length: 255 mm
  • Width: 265 mm
  • Height: 395 mm
  • Weight: 5.3 kg


Download Links/info to go Here…