Menu Close

TDS 50 M Ceramic Fan Heater

Fast, effective and draft-free heat without dust combustion

Thanks to its high airflow and advanced PTC heating battery technology, the TDS 50 M is ideally suited for the rapid heating of large, cool rooms.

Whether a workshop, living room or work area – the combination of robust construction, solid workmanship and discreet design blends harmoniously into any environment and can be transported quickly and easily thanks to a thermally insulated carrying handle.

Enquire Now

Out of stock

Free standard delivery over £200

With the TDS 50 M the desired temperature can be adjusted steplessly as required via the integrated thermostat. For higher point-to-point heat, the heating output can be increased in two stages to up to 9 kW. If necessary, the blower can also be used in the pure fan mode without heating.

Powerful heating with the TDS 50 M with high voltage current, but instead of a conventional heating coil, a long-life PTC ceramic heating element is supplied with energy, which results not only in a more homogenous warm air flow with a lower noise level in a direct comparison of performance – the ceramic PTC register also offers you many additional advantages:

PTC ceramic heating elements are more durable and more robust than devices with heating wires or heating coils. In addition, PTC batteries automatically regulate the power consumption depending on the ambient temperature and are thus automatically protected against overheating. For this reason, the PTC heat batteries do not have to be cooled by strong air supply, which allows for the installation of more turbulent blowers, which are generally quieter.

In combination with the large heating surface, TDS-M heaters generate a pleasantly homogeneous, draft-free hot air flow in a quiet way. In addition, no dust is burnt in this technology, which means that the air is not contaminated with additional fine dust – ideal for applications in inhabited areas.

The safe heating operation even during continuous operation is not a problem with The TDS 50 M: an overheating protection is integrated and the fan motor is equipped with thermal protection and an automatic after-cooling function, which keeps the fan in operation for a safe cooling down after the device is shut down. As an additional safety feature, the integrated ceramic heating element also increases the standing stability of this heating fan because of the design.

Please note that this heater operates with a 5-pole plug.Practical benefits:

  • Durable, ceramic PTC heating coil
  • Multi-stage temperature control with two heat settings plus separate cold air stage
  • Integrated thermostat for constant hot air flow
  • Overheating protection
  • Fan motor with thermal protection
  • Fan post-cooling function to cool down the components
  • Condensate-free heat without oxygen consumption – ideal for indoor heating
  • Connection cable already integrated
  • Durable, sturdy and quiet
  • Easy to transport and operate

 

Possible Applications:

  • Automobile workshops
  • Construction sites
  • Mounting inserts
  • Restaurants
  • Warehouses and laboratories
  • Greenhouses
  • and many more..

 

Faster air heating – more consistent room temperature

Trotec heaters with PTC ceramic heating elements (A) are characterized not only by a faster heating behavior compared to conventional heating coil technology (B). As a result of the method, differences in the response behavior of the heating elements also occur.

Although the thermostat control of both devices is implemented by a two-position controller to maintain the selected target temperature (orange), the corresponding temperature adjustment for devices with heating coils is significantly slower and with greater deviations from the desired target temperature. The reason for this is the different current conduction characteristics of the heating elements:

If the current flows through heating coils, they are, once warmed, always the same temperature. In order to regulate the desired room temperature, the supply of electricity is then interrupted, whereby the coil cools down, and is activated again later by the thermostat, so that it is fully heated again until the next shutdown when the set target temperature is reached.

This “on / off” process results in considerably greater temperature fluctuations than with ceramic heating elements, since these have an integrated temperature self-regulation. The hotter PTCs become, the greater their current-conducting resistance, whereby less current can flow through the heating element and the heating power thereof drops correspondingly, which results in significantly lower temperature fluctuations and generally also less on / off times in thermostat-controlled operation.

For this reason ceramic heaters can produce more consistent room temperatures for temperature-sensitive production processes as well as a more comfortable working environment.

Weight7 kg
Dimensions34.7 × 26.7 × 45.5 cm

Technical

The technical details of the electric heater TDS 50 M at a glance:

  • Heating power stage 1: 0.08 kW
  • Heating power stage 2: 6 kW
  • Heating power stage 3: 9 kW
  • Air flow: 1,180 m³ / h
  • Fan stages: 1
  • Power consumption: 13.7 A
  • Connection voltage: 380 – 400 V / 50 Hz
  • Power supply: protective contact plug (CEE 16 A, 5-pin)
  • Connection cable: integrated (length 1.15 m)
  • Mobility: portable
  • Sound level: 53 dB (A)
  • Overheating protection: yes
  • Dimensions (L x W x H): 347 x 267 x 455 mm
  • Weight: 7 kg

Downloads

Download Links/info to go Here…