The IDE 50 oil fired heater with a heating performance of 50 kW (44,100 kcal) and an air flow rate of 2,000 m³/h. The maximal fuel consumption is 4.8 litres of oil per hour.
The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth.
All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside.
With integrated thermostatic control, the desired temperature can easily be controlled. For temperature control at a distance of up to 25 metres, an optional external thermostat is available.
The heater is both durable and weatherproof for all necessary outdoor work.
For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat.
The fuel level of the integrated fuel tank can be read on the fuel level display.
Practical advantages:
- Very economical solution for standard oil heaters
- Integrated fuel tank with fuel level display
- Electronic flame safety protection
- Overheating protection
- Stainless steel fire combustion chamber
- Integrated thermostat with a dual display for required and ambient temperatures
- Connection for external thermostat
- Wheeled chassis for easy movement
- Heating function: indirect
Technical details of the IDE 50:
- Heating function: indirect
- Air flow rate: 2,000 m³/h
- Heating performance: 50 kW (44,100 kcal)
- Temperature increase ∆T: 62°C
- Input voltage: 230 V / 50 Hz
- Current consumption: 3.2 A
- Fuel consumption max.: 4.8 l/h
- Thermostat: integrated
- Fuel supply: Danfoss® injection pump
- Sound level (distance 1 m): 78 dB (A)
- Tank capacity: 68l
- Length: 1,365 mm
- Width: 550 mm
- Height: 985 mm
- Weight: 56.7 kg
